More than 40 percent of the traffic accidents on the highway are caused by abnormal tire pressure. To reduce such accidents, the installation of tire pressure monitoring system (TPMS) is necessary. With the TPMS, we can keep the tire working within the specified pressure and temperature ranges at any time to reduce the damage of the tire for driving safety. Besides, the higher or lower tire pressure can cause tire wear. The installation of TPMS could reduce tire wear, prevent tire explosion, save fuel, and keep your car in good care, rather helpful. Just get this ZEEPIN product home and try out.
- Real-time monitor:
ZEEPIN TPMS can provide the pressure and temperature statuses of 4 tires in real time. When the data are abnormal, the driver will get the voice alarm and flashing warning icon.
- Power supply:
It features the solar panel with high conversion rate and USB charging port, supporting solar charging and USB cable charging, no need to worry about the power shortage.
- Smart sleep mode:
After successful installation, it will sense the vibration and turn on automatically when you open the car door. And it will turn off automatically after parking for 3 minutes, rather energy-saving.
- Different placements:
You can directly place it on the car dashboard or stick it on your car windshield for there are 2 strong adhesive tapes on its backside. Sticking it on the front windshield is more in line with the visual habit. You can know the situations of tires without turning your head.
- 4 external sensors:
Adopted the advanced chips, these 4 sensors are with high sensitivity and good accuracy for measuring pressure and temperature, no misleading readings. Besides, with the IP67 waterproof grade, they are suitable for all weathers.
- Wide application:
This system is widely suitable for vehicles with 4 tires and the maximum pressure of the tire is below 8 bar, such as the commercial car, jeep, off-road vehicle, minibus, and sedan car, etc.
- Battery: built-in CR1632 button cell
- Working voltage: 2.0 - 3.6V
- Working environment: -40 - 125 Deg.C
- Working pressure: 0 - 99 psi
- Pressure accuracy: plus or minus 1.5 psi
- Waterproof grade: IP67
- Transmission frequency: 433.92MHz
- Battery type: 280mAh Li-ion battery
- Working voltage: 5V
- Working environment: -40 - 85 Deg.C
- Transmission frequency: 433.92MHz
- Pressure unit: psi / bar
- Temperature unit: Deg.C / Deg.F
0.198 Package weight:
0.232 kg Package Size(L x W x H):
15.50 x 12.00 x 6.00 cm / 6.1 x 4.72 x 2.36 inches
Package Contents: 1 x TPMS, 4 x External Sensor, 4 x Mounting Nut, 1 x Wrench, 1 x Button Cell, 1 x English User Manual
IPXX Rating Chart
The IP Code (or International Protection Rating, sometimes also interpreted as Ingress Protection Rating*) consists of the letters IP followed by two digits and an optional letter. As defined in international standard IEC 60529, it classifies the degrees of protection provided against the intrusion of solid objects (including body parts like hands and fingers), dust, accidental contact, and water in electrical enclosures. The standard aims to provide users more detailed information than vague marketing terms such as waterproof.
The digits (characteristic numerals) indicate conformity with the conditions summarized in the tables below. For example, an electrical socket rated IP22 is protected against insertion of fingers and will not be damaged or become unsafe during a specified test in which it is exposed to vertically or nearly vertically dripping water. IP22 or 2X are typical minimum requirements for the design of electrical accessories for indoor use.