Ostukorv:
0 toode: Toodet: (tühi)
Tooted puuduvad
To be determined Saatmine
0,00 € Kokku:
Toode on edukalt lisatud ostukorvi
Kogus
Kokku:
Teie ostukorvis on 0 toodet. Teie ostukorvis on üks toode.
Kokku tooteid:
Total shipping To be determined
Kokku:
Toodet pole enam laos
Maksed
VISA / MasterCard / PayPal
Saadetise hinnang
Your location is : United States/
There is no carrier available to delivery the product to your location
Shipping from: Latvia
Rohkem infot
Main Features:
- Step angle: 1.8 degree
- Number of phases: 2
- Voltage: 3.96V
- Current: 0.9A
- Resistance: 4.4 ohm
- Holding torque: 0.34 Nm
- Operating ambient temperature: -20 Deg.C - 50 Deg.C
- Operating environment humidity: 90 percent
- Axis diameter: 5mm
Note:
The product appearance may be different because of different batches, but the functions are the same
- Step angle: 1.8 degree
- Number of phases: 2
- Voltage: 3.96V
- Current: 0.9A
- Resistance: 4.4 ohm
- Holding torque: 0.34 Nm
- Operating ambient temperature: -20 Deg.C - 50 Deg.C
- Operating environment humidity: 90 percent
- Axis diameter: 5mm
Note:
The product appearance may be different because of different batches, but the functions are the same
Brand: Anet
0.262
Package weight: 0.300 kg Product Size(L x W x H): 3.50 x 4.00 x 4.00 cm / 1.38 x 1.57 x 1.57 inches
Package Size(L x W x H): 4.50 x 5.00 x 5.00 cm / 1.77 x 1.97 x 1.97 inches
Package Contents: 1 x Linear Screw 2 Phase 42 Stepper Motor 3D Printer Engraving Machine
Üldine informatsioon | |
| Värv | Black |
Müüja KKK
Only registered users can post a new question.
Selle toote kohta pole hetkel ühtegi küsimust.
Ole esimene, kes küsib küsimust.
Müüja
DR & CH
 | Identifitseerimine: 40103934094 Aadress: Lielupes 68 - 100, Riga, LV-1016, Latvia Telefon: 37125281160 See müüja vastab teie küsimustele:en,ru |
Maksed
Garantii ja tagastamine
Ülevaade (0)
0 ülevaade - 
Hetkel antud tootel arvustused puuduvad. - Ole esimene - jäta tootele arvustus!